Xerox WorkCentre 470cx-9904 - Manual (Page 27)

Book
TOC
Chapter
TOC
Search
1-21
3 Load the print material in the Automatic Paper Feeder. Ensure
that the right edge of the media is in contact with the right side
of the Automatic Paper Feeder. Do not exceed the rated
capacity. Do not mix different types of print media. Refer to
the following instructions for loading each type of print
material.
a) Load paper or transparencies with the print side facing you.
b) Load letterhead paper with the design side face-up. The top
edge of the sheet with the logo should enter the printer first.
Previous Page Next Page