Xerox WorkCentre 470cx-9904 - Manual (Page 95)

Book
TOC
Chapter
TOC
Search
3-19
If you make a mistake while entering a number, use the Right
or Left buttons to move the cursor under the wrong digit,
then enter the correct digit, or press the Search/Delete button.
3 The display asks you to enter a name. Using the Number
keypad, enter the desired name (up to 20 alphanumeric
characters). For information on how to enter names, see
Entering Alphanumeric Characters on page 3-30.
Or
If you don’t want to assign a name, skip this step.
Note: If you assign a name to the number, the name will appear in
the display whenever you press the One-Touch button.
4 Press the Start/Enter button when the name appears
correctly or without entering a name.
The display prompts you to press another One-Touch button.
5 To assign another One-Touch number, press the desired One-
Touch button and repeat steps 2 through this step.
Or
To return to Standby mode, press the Stop button .
Previous Page Next Page