Problems with output power, Problems with – Agilent Technologies E8257D/67D User Manual
Page 36
Advertising
32
Chapter 3
Operation Verification
Checking the Output Power
Problems with Output Power
If a problem occurs when verifying output power levels, perform the following procedure:
1. Verify the power sensor being used in this test is the appropriate sensor.
2. Verify the power sensor calibration factors, if required, are correct.
3. Verify the power sensor is properly calibrated to the power meter.
If the problem continues, perform a Power Level Accuracy performance test. Refer to the troubleshooting
section of the Service Guide.
Advertising