8 energy saving, Clock functions, 1 clock functions table – AEG BY9314001M User Manual

Page 13: 2 count up timer

Advertising
background image

6.8 Energy saving

The appliance contains features which

help you save energy during everyday

cooking:
• Residual heat

– When an oven function or

programme operates, the heating

elements are deactivated 10%

earlier (the lamp and fan continue

to operate). For this feature to

operate, the cooking time must

be longer than 30 minutes or you

must use the clock functions

(Duration, End, Time delay). This

feature does not operate with grill

functions.

– When the appliance is off, you

can use the heat to keep the food

warm. The clock / residual heat

display shows the remaining

temperature, and the bars show

the temperature as it decreases.

• Cooking with the lamp off - Touch

to deactivate the lamp during

cooking.

• Eco functions - refer to "Oven

functions".

• When you use the Moist Fan Baking

function, the lamp deactivates after 30

seconds. The lamp activates again
when you touch or when you open

the appliance door.

• When you use the ECO functions, the

lamp deactivates. The lamp activates
again when you touch or when you

open the appliance door.

• Deactivating the display - If

necessary, you can fully deactivate the
display. Touch and

at the same

time until the display goes out. This

step also activates the appliance.

7. CLOCK FUNCTIONS

7.1 Clock functions table

Clock function

Application

COUNT UP TIMER

To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance.

TIME OF DAY

To show the time of day. To change the time of day, re-
fer to "Setting the time".

DURATION

To set how long the appliance operates.

END

To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.

SET+GO

To start the appliance with necessary settings with only
one touch of the sensor field any time later.

7.2 Count Up Timer

The Count Up Timer is not

activated if Duration and End

are set.

The Count Up Timer starts to count when

the appliance starts to heat.
1. To reset the Count Up Timer, touch

again and again until flashes in

the display.

ENGLISH

13

Advertising
This manual is related to the following products: