AEG DE4003000B - Manual (Page 28)

2x 3,5x16
Drill with drilling machine at high
revolution and lowest torque.
13.1 Electrical installation
WARNING!
Only a qualified and competent
person must do the electrical in-
stallation.
The manufacturer is not responsi-
ble if you do not follow safety
precautions from the Safety
chapters.
This appliance is supplied without a
main plug and a main cable.
Applicable cable types : H07 RN-F, H05
RN-F, H05 RRF, H05 VV-F, H05 V2V2-F
(T90), H05 BB-F
13.2 Electrical Installation
• Enquiries regarding the installation of
the cooker point, if required, should
be made to your Regional Electricity
Company to ensure compliance with
their regulations.
• The appliance socket switch should be
outside the cabinet but within 2m of
the appliance to make it accessible to
switch off the appliance in case of an
emergency.
• To protect the hands, wear gloves
when lifting the oven into its housing.
HOUSE CIRCUIT
Earth leakage and continuity
tests must be carried out before
the appliance is connected to the
mains supply and re-checked af-
ter fitting.
GETTING THINGS READY
CHOICE OF ELECTRICAL
CONNECTION
There are three possible ways to con-
nect your appliance. In each case the ap-
pliance should be operated using at
least 6mm² twin core and earth PVC in-
sulated multicore cable. Please choose
28 www.aeg.com