3 steam cleaning, 4 steam generation system, 5 removing and installing the door – AEG KE8404001M User Manual

Page 20

Advertising
background image

To clean the appliance, remove the shelf

supports.
1. Pull carefully the supports up and out

of the front catch.

1

2

3

2. Pull the front end of the shelf support

away from the side wall.

3. Pull the supports out of the rear

catch.

Install the shelf supports in the opposite

sequence.

12.3 Steam Cleaning

Remove the worst dirt manually.
1. Put 250 ml of water with 3

tablespoons of vinegar directly into

the steam generator.

2. Activate the function: Steam

Cleaning.

The display shows the duration of the

function. An acoustic signal sounds when

the programme is completed.

3. Touch a sensor field to deactivate

the signal.

4. Wipe out the appliance with a soft

cloth. Remove the water from the

steam generator.

Keep the appliance door open for

approximately 1 hour. Wait until the

appliance is dry. To speed up the drying

you can heat up the appliance with hot

air at temperature 150 °C for

approximately 15 minutes.

12.4 Steam generation system

CAUTION!

Dry the steam generator

after each use. Remove the

water with the sponge.

Remove the limescale with

water and vinegar.

CAUTION!

Chemical de-scaling agents

can cause damage to the

enamel. Follow the

instructions of the

manufacturer.

1. To clean the water drawer and the

steam generator, put the water and

vinegar mixture (approximately 250

ml) through the water drawer into the

steam generator. Wait for

approximately 10 minutes.

2. Remove the water and vinegar with

the sponge.

3. Put clean water (100 - 200 ml) into the

water drawer to flush the steam

generation system.

4. Remove the water from the steam

generator with the sponge and rub it

dry.

5. Keep the door open to let the

appliance dry fully.

12.5 Removing and installing

the door

You can remove the door and the

internal glass panels to clean it. The

number of glass panels is different for

different models.

WARNING!

Be careful when you remove

the door from the appliance.

The door is heavy.

1. Open the door fully.

2. Fully lift up the clamping levers (A) on

the two door hinges.

A

A

3. Close the door until it is at an angle

of approximately 45°.

www.aeg.com

20

Advertising