AEG KE8404001M - Manual (Page 11)

Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.6 Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
• Cooking with the lamp off - touch
and hold for 3 seconds to deacti-
vate the lamp during cooking.
• Eco functions - refer to section "Heat-
ing Functions" (for selected models
only).
7. CLOCK FUNCTIONS
7.1 Clock functions
Symbol Function Description
Minute Minder
To set a countdown (maximum: 2 hours, 30 mi-
nutes). This function has no effect on the operation
of the appliance. You can also activate it when the
appliance is deactivated. Touch to activate the
function. Touch
or to set the minutes and
OK to start.
Duration
To set the length of an operation (maximum: 23
hours, 59 minutes).
End Time
To set the switch-off time for a heating function
(maximum: 23 hours, 59 minutes).
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90% of the set time.
The appliance uses the residual
heat to continue the cooking
procedure until the time ends.
The residual heat can last from 3
to 20 minutes.
Setting the clock functions:
1. Set a heating function.
2. Touch again and again until the
display shows the necessary clock
function and the related symbol.
3. Touch or to set the necessa-
ry time. Touch OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4. Touch a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time , the ap-
pliance deactivates automatically.
• With Duration and End Time , you
must set the heating function and the
ENGLISH
11