A&D WM:PD4000136 Ambulatory Blood Pressure Monitor - Manual (Page 14)

Page 12
Replacing Batteries Initializing the recorder
Activating the recorder
Replacing Batteries
Caution
❏ When " B " is displayed, the recorder can not take a measurement. Please
replace the new batteries before using.
❏ If " B " is displayed during the measurement, replace with new batteries at once.
❏ Use alkaline batteries or the specified rechargeable batteries for the recorder.
❏ Do not mix new and used batteries in the device.
Steps for replacing the batteries
Step 1 Open the battery cover.
Step 2 Turn off the power switch.
Step 3 Replace with new batteries. ( note the direction, "+" and "-".)
Step 4 Turn on the power switch.
Step 5 Close the battery cover.
Power switch
Battery cover
ON
OFF
Step 1
Step 5
Step 2
Step 4
Used batteries
New alkaline batteries
Step 3
SYS/INTER
VAL
DIA PULSE/TIME
A I R
AUT
O ON/OFF
STAR
T STOP
0
1
2
0 1 2 3 4 5 6 7 8 9