Mode iii settings – A&D WM:PD4000136 Ambulatory Blood Pressure Monitor User Manual

Page 18

Advertising
background image

Page 16

Mode III Settings

Set up procedure

Before you enter into mode III, read the procedure below. Also, refer to the

example on the next page for the setting procedure.

Each blocks starting time must match the previous blocks finish time.

The end of block 6 automatically equalizes to start time of the block 1.

If you enter the block 1 start time in any other block, these parameters are

saved and this sequence is finished.

When selecting 120 minutes for the current frequency, you must adjust the

start time of the next block so that the current block fits a multiple of 120

minutes. If you do not fit to the next start time, an error code is displayed.

The recorder displays as 60 minutes and

as 120 minutes.

When you enter the sequence of mode III settings, the recorder initializes each

start time to the start time of block 1 and each frequency to "-" (not used).

To read the current settings, press the

START STOP

key in this sequence.

Display & key

Sequence number
Parameter

Selecting a
parameter

AUTO
ON/OFF

START
STOP

Selecting a sequence number

Sign of setting parameters
for automatic measuremnt

Items

Selection for the Automatic Measurement

Initializing the recorder

Sequence

number

01

02

03

04

05

06

07

08

09

10

11

12

13

Parameters (monitor)

0 ~ 23 o'clock

- , 5, 10, 15, 20, 30, 60, 120 minutes

0 ~ 23 o'clock

- , 5, 10, 15, 20, 30, 60, 120 minutes

0 ~ 23 o'clock

- , 5, 10, 15, 20, 30, 60, 120 minutes

0 ~ 23 o'clock

- , 5, 10, 15, 20, 30, 60, 120 minutes

0 ~ 23 o'clock

- , 5, 10, 15, 20, 30, 60, 120 minutes

0 ~ 23 o'clock

- , 5, 10, 15, 20, 30, 60, 120 minutes

0 ~ 23 o'clock

Meaning

Start time of first block

Frequency of first block

Start time of second block

Frequency of second block

Start time of third block

Frequency of third block

Start time of fourth block

Frequency of fourth block

Start time of fifth block

Frequency of fifth block

Start time of sixth block

Frequency of sixth block

End of sixth block

Initial value

The "-" means "not used".

Advertising