AEG SRP 4335 CD-MP3 - Manual (Page 42)

English
42
Troubleshooting
Symptoms Course Solution
CD can not be
played back. CD is not inserted
or inserted incor-
rectly. Ensure that the
disc is inserted with
the label facing
upwards.
Batteries too weak. Insert new batteries
or operate the de-
vice with the mains
lead.
CD jumps during
playback. Check the disc for
fingerprints, dirt or
scratches. Check the disc for
fingerprints, dirt or
scratches.
The unit cannot
be operated The unit is blocked
and “hangs” Pull the mains plug
for approximately
5 seconds. Then
connect the unit
again.
NOTE: Automatic Standby switch
In order to comply with the “ErP 2 ( Energy-related
Products)” Ecodesign Directive (2009/125/EC) that aims
at animproved energy efficiency and general environmen-
tal compatibility, the device will automatically switch to
standby after a certain amount of time without a signal. To
use the device again press the
PLAY/PAUSE button (25).
Technical Specifications
Model: ................................................................SRP 4335 CD/MP3
Power supply: ..................................................DC 13.5 V
Battery operation: .........................................10 x 1.5 V UM 1/R 20
Power consumption:.................................................................25 W
Output rating: ............................................................400 W PMPO
Protection class: ................................................................................II
Radio section:
Frequency ranges: .......................VHF / FM 88 ~ 108.0 MHz
.......................MW / AM 540 ~ 1600 kHz
Net weight: .............................................................................5.40 kg
Adapter
Protection class: ................................................................................II
Input: ........................................................AC 100-240 V~ 50/60 Hz
Output: ....................................................................DC 13.5 V, 1.3 A
Polarity: ................................................................................
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.