Troubleshooting – AT&T TL96371 User Manual

Page 19

Advertising
background image

Appendix

15

Troubleshooting

I get noise, static, or weak signals even when I’m near the

telephone base.

If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone line, you must

install a DSL filter between the telephone line cord and the

telephone wall jack. The filter prevents noise and caller ID

problems as a result of DSL interference. Please contact your

DSL service provider for more information about DSL filters.
You may be able to improve the performance of your cordless

phone by installing your telephone base as far as possible

from any other existing cordless telephone system that may

already be installed.
Other electronic products such as HAM radios and other DECT

phones can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.
Do not install this phone near a microwave oven or on

the same electrical outlet. You may experience decreased

performance while the microwave oven is operating.
If you plug your phone in with a modem or a surge protector,

plug the phone (or modem/surge protector) into a different

location. If this does not solve the problem, relocate your

phone or modem farther apart from one another, or use a

different surge protector.
Move your phone to a higher location. The phone may have

better reception in a high area.
If other phones in your home are having the same problem,
contact your telephone service provider (charges may apply).

Advertising