Parked-car ventilation system, A congenial climate – BMW 745I User Manual

Page 114

Advertising
background image

A congenial climate

112

Switching on/off in the Control
Display

1.

With the ignition on, select the "Cli-
mate" menu in the Control Center

2.

Select the second page of the

"Climate" menu

3.

Select "Extra" and confirm

4.

Select "Rear air cond." and confirm.

The maximum cooling mode is auto-
matically activated when you switch

on the rear air conditioner in the Control
Display.

<

Select "Rear air cond." again and confirm
your entry to deactivate the system.

Rear ventilation

Use the lever 1 to vary the airflow direction.

For additional information on rear ventila-
tion options, refer to page

108

.

Parked-car ventilation
system

System operation is controlled using the
Control Display. You can set two different
times for the system to start.

The parked-car ventilation blows air into
the passenger compartment to lower inte-
rior temperatures.

The system remains on for 30 minutes. You
can also switch the system on and off man-
ually. Since the system uses a substantial
amount of electrical current, you should
refrain from activating it twice in succes-
sion without allowing the battery to be
recharged in normal operation between
use.

The parked-car ventilation system is avail-
able for preprogrammed operation at out-
side temperatures above approx. 59 7
(156) and for direct activation at any tem-
perature, but is not operational when the
vehicle is underway.

The air enters the passenger compartment
through the vent outlets in the instrument
panel, which can be adjusted for both
direction and airflow. These outlets must
be open for the system to operate.

Switching on and off directly

1.

Activate the radio mode at the ignition
lock

2.

Select "Indep. ventil." on the second
page of the "Climate" menu and confirm
your selection.

Select "Indep. ventil." a second time and
confirm to switch off the system directly.

Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG

Advertising
This manual is related to the following products: