BMW 745I User Manual

Page 97

Advertising
background image

At a glance

Controls

Driving tips

Communications

Navigation

Entertainment

Mobility

Reference

95

difficult driving conditions, such as on
snow, etc.

Indicator lamps

The indicator lamp in the Info Dis-
play goes out soon after you start
the engine.

If the indicator lamp flashes:
DSC controls the drive and braking forces.

The indicator lamp stays lit:
DSC has been switched off via the Control
Display.

The indicator lamp and the brake
warning lamp remain on continu-
ously:
DSC, DTC and DBC have been
deactivated or a system malfunc-
tion is present.

When the system is off, the stability main-
tenance functions described above are no
longer available. The vehicle will remain
completely operational, however, without
DSC.
Please respond to any malfunctions by
referring the problem to your BMW center.

Indicator and warning lamps on
Canadian models.

Activating DTC Dynamic Traction
Control

You may find it useful to briefly activate
DTC under the following special circum-
stances:

>

When rocking the vehicle and starting
off in deep snow or on loose road sur-
faces

>

When ascending snow-covered hills,
and when driving in deep or on hard-
packed snow

>

When driving with snow chains.

Select "Settings". Select "DTC" and con-
firm your entry. DTC is now activated. The
DTC indicator lamp in the Info Display
lights up.

When DTC is active, DSC provides
only limited system response up to a

speed of approximately 45 mph (70 km/h).
Control intervention to maintain stability is
reduced.

<

Deactivating DTC

Select "Settings". Select "DTC" and con-
firm your entry. DTC is now deactivated.
The

DTC

indicator lamp in the Info Display

goes out.

Deactivating DSC

Select "Settings". Select "DSC" and con-
firm your entry. DSC is deactivated. The
indicator lamp in the Info Display remains
on continuously.

Deactivating DSC automatically deacti-
vates DTC as well. The systems for
enhancing stability and traction are deacti-
vated, and there is no active braking inter-
vention or torque control.

A status report appears in the Check Con-
trol. Please take note of the additional
information in the Control Display.

Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG

Advertising
This manual is related to the following products: