Starting, Stopping, Status displays – BMW 745I User Manual
Page 158: Cd changer
CD changer
156
Inserting the CD magazine
1.
Press button 1; the lid opens
2.
Ensure that the arrow symbol is
pointing toward the CD player and slide
the magazine 2 all the way in. The lid
closes automatically.
The CD changer automatically reads
in the loaded CDs and is then ready
for operation.
<
Operating temperatures
Only operate the CD changer at tem-
peratures of 5 7 (–156) to 1407
(+606); otherwise, malfunctions can
occur.
Even when switched off, the device should
only be exposed to temperatures between
–137 (–256) and 1857 (+856).
<
Atmospheric humidity
High levels of humidity inside the player
can condense on the laser's scan lens and
prevent it from reading the CD.
Starting
1.
Insert the CD magazine
2.
Select
and confirm.
After a few seconds, play will resume at the
point where the CD stopped earlier.
If the CD magazine has been newly
filled, playback begins with the lowest
CD, e.g. CD 1, track 1.
<
Volume adjustment, refer to page
.
.
If you play self-recorded audio CDs,
faults, e.g. drop-outs, can occur, or
the CD is not played at all.
<
Stopping
Switch off audio or video sources, refer to
page
or switch over to
>
>
>
>
>
.
Status displays
The CD magazine's load status is indicated
in the Control Display.
If the display fails to detect a CD that
you have loaded in the magazine,
check to ensure that the CD has been
inserted correctly and inspect it for signs of
defects.
<
1.
{
CD changer}
2.
{
CD on}.
1.
{
CD changer}
2.
{
Stop}.
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG