Brother Laser Printer HL1660e - Manual (Page 317)

2001/10/02
CHAPTER 8 BAR CODE CONTROL - 2
C ONTENTS
1. INTRODUCTION ....................................................................................................................................3
2. PRINT BAR CODES OR EXPANDED CHARACTERS .................................................................4
3. DEFINITION OF PARAMETERS.........................................................................................................5
3.1. Bar Code Mode ..................................................................................................................................5
3.2. Bar Code Style, Expanded Character Shading, Line Block Drawing & Box Drawing Shading.........5
3.3. Bar Code Scaling (Width only)...........................................................................................................6
3.4. Bar Code Human Readable Line On or Off.......................................................................................6
3.5. Quiet Zone..........................................................................................................................................6
3.6. Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing Units..............................6
3.7. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset in the X-axis .............7
3.8. Bar Code & Expanded Character Offset in the Y-axis ......................................................................7
3.9. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Height..................................7
3.10. Expanded Character, Line Block Drawing & Box Drawing Width ...................................................7
3.11. Expanded Character Rotation..........................................................................................................7
3.12. Bar Code Data Start.........................................................................................................................8
3.13. Box Drawing.....................................................................................................................................9
3.14. Line Block Drawing ..........................................................................................................................9
3.15. Expanded Character Data Start.......................................................................................................9
4. EXAMPLE PROGRAM LISTINGS ................................................................................................... 10