Brother Laser Printer HL1660e - Manual (Page 402)

2001/10/02
APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 8
3.4 Data
3.4.1 Save data
Command
ESC CR ! 12347F ID(2byte) size(4byte) data...
Available Devices
F, A, H
Description
This command saves data wh ich is sent from the PC with the specified ID onto the device.
If there is insufficient memory in the printer to store the data, a memory full error occurs.
When the printer supports two or more storage devices, the command saves the data onto the device
specified by the select storage device command. When only one device is enabled, the command saves
onto that device.
Error
HL-1660e/2060/2400C:
34 MEMORY FULL
43 CARD1 W ERROR
43 CARD2 W ERROR
HL-2400Ce/3400CN:
43 DEVICE1 W ERROR
43 DEVICE2 W ERROR
43 DEVICE3 W ERROR
HL-2460/3260N:
43 CARD ERROR
43 HDD ERROR
HL-1650/1670N:
43 SERVICE E74
3.4.2 Execute data
Command
ESC CR ! 12349F ID(2byte)
Available Devices
F, A, H
Description
This command executes the specified ID data.
When the printer supports two or more storage devices, the command saves the data onto the device
specified by the select storage device command. When only one device is enabled, the command saves
onto that device.
Error
N/A