Belkin Pre-N - Manual (Page 30)

29 28
Manually Configuring your Router
29 28
Manually Configuring your Router
DHCP Client List
You can view a list of the computers (known as clients), which are
connected to your network. You are able to view the IP address
(1)
of
the computer, the host name
(2)
(if the computer has been assigned
one), and the MAC address
(3)
of the computer’s Network Interface
Card (NIC). Pressing the “Refresh”
(4)
button will update the list. If
there have been any changes, the list will be updated.
Internet WAN
The “Internet WAN” tab is where you will set up your Router to connect
to your Internet Service Provider. The Router is capable of connecting
to virtually any ADSL Service Provider’s system provided you have
correctly configured the Router’s settings for your ISP’s connection type.
Your connection settings are provided to you by your ISP. To configure
the Router with the settings that your ISP gave you, click “Connection
Type”
(1)
on the left side of the screen. Select the connection type you
use. If your ISP gave you DNS settings, clicking “DNS”
(2)
allows you to
enter DNS address entries for ISPs that require specific settings.
When you have finished making settings, the “Internet Status” indicator
will read “Connection OK” if your Router is set up properly.
(1) (2) (3)
(4)
(1)
(2)