Olympus DM-2 - Manual (Page 24)


1
EN
Power supply
Notes
• Do not put in or take out the battery or AC
adapter when the recorder power is on or
when this recorder is connected to another
device. It may cause problems with the
values and functions set in the recorder.
• The charger can be used within the range of
AC 100 V to AC 240 V (50/60 Hz).When using
the charger abroad, you may need a plug
adapter to convert the plug to the shape of
the AC wall outlet. For details, ask at your
local electrical shop or travel agent.
• Do not use travel voltage converters as they
could damage your charger.
Charging by connecting to a
computer via USB
You can charge the battery by connecting
to a PC's USB port. When charging, be sure
to correctly place the rechargeable battery
(supplied) into the recorder (☞ P.22).
1 Boot the PC.
2 Connect the USB connection
cable to the USB port of the PC.
3 While the recorder is during stop
mode or hold mode, connect
the USB cable to the connecting
terminal on the bottom of this
recorder.
• Charging has started when LED
indicator light is orange and the battery
indicator on the display changes to the
charging indicator.
Po
w
er s
up
ply