Olympus PT-E05 - Manual (Page 7)

EN 6
En
Insert the silica gel ......................................................................................................... 24
Check the loading status. ..................................................................................................... 24
Seal the Case....................................................................................................................... 25
Check the operation of the loaded camera. ......................................................................... 26
Perform the final checks....................................................................................................... 26
Visual Inspection............................................................................................................ 26
Final Test ............................................................................................................................. 27
4.Underwater Shooting ............................................................................................28
How to use the hand strap ................................................................................................... 28
Hold the Case carefully. ....................................................................................................... 28
Gently press the shutter lever. ....................................................................................... 28
5.Handling After Shooting .......................................................................................29
Wipe off any waterdrop. ....................................................................................................... 29
Unload the digital camera. ................................................................................................... 30
Wash the Case with pure water. .......................................................................................... 31
Dry the Case. ....................................................................................................................... 31
6.Maintaining the Waterproof Function..................................................................32
Remove the O-ring. .............................................................................................................. 32
Procedure ...................................................................................................................... 32
Remove any sand, dirt, etc. ................................................................................................. 32
Install the O-ring. .................................................................................................................. 33
How to Apply Grease to the O-ring ...................................................................................... 33
Replace consumable products. ............................................................................................ 34
Maintenance of the threaded sections on the TTL cable and TTL cable connector............. 34
Maintenance of the TTL Connector Cap .............................................................................. 34
7.Appendix ................................................................................................................35
Q & A on use........................................................................................................................ 35
Specifications ....................................................................................................................... 39
PT-E05_EN.Book Page 6 Wednesday, June 4, 2008 12:34 PM