Olympus Stylus 740 - Manual (Page 32)

32
EN
Menu operations
The pixel mapping feature allows the camera to check and adjust the CCD and image processing
functions. It is not necessary to operate this function frequently. Approximately once a year is
recommended. Wait at least one minute after taking or viewing pictures to allow the pixel mapping
function to perform properly. If you turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press o.
The date and time is saved with each image, and is used in the file name.
• The first two digits of [Y] are fixed.
• The time is displayed in the 24-hour format.
• To set the time precisely, with the cursor at either [M] or [Y/M/D], press o as the time signal strikes
00 seconds.
PIXEL MAPPING .....................................................Adjusting the image processing function
s ...........................................................................................Adjusting the monitor brightness
X .........................................................................................................Setting the date and time
OK SET MENU BACK
s
1: Brightens the monitor. 2: Darkens the monitor.
Press o after setting is complete.
MENU CANCEL
X
Y / M / D Y / M / D
Y M D T I M E Y M D T I M E
----.--.-- --:-- ----.--.-- --:--
Y-M-D (Year-Month-Day)
Hour
Date formats (Y-M-D, M-D-Y, D-M-Y)
Minute
Exits a setting.
d4314_15_e.book Page 32 Monday, June 26, 2006 7:13 PM