Olympus Stylus 740 - Manual (Page 60)

60
EN
Getting to know your camera better
Some functions cannot be set in certain shooting modes. For more details, refer to the table below.
Grayed out areas ( ) in the s column indicate that to enable the shooting scene in s
mode, there are restrictions to the functions that can be set. g “Functions with restrictions in
shooting scenes (applies to both Stylus750/ µ750 and Stylus740/µ740)” (P. 61)
Functions available in shooting modes
Stylus750/ µ750
NO INK
The printer has run out of ink. Replace the ink cartridge in the printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS
CHANGED
The printer’s paper tray has
been removed or the printer
has been operated while
changing settings on the
camera.
Do not operate the printer while changing
settings on the camera.
PRINT ERROR
There is a problem with the
printer and/or camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
r
CANNOT PRINT
Pictures recorded on other
cameras may not be printed
on this camera.
Use a computer to print.
Functions available in shooting modes and scenes
Shooting mode K
s n
Function P AUTO
F 9 9 9 9
Flash 9 9 —
&/% 9 9 9
Y 9 9 9
Image stabilizer 9 9 9 —
Optical zoom 9 9 9
WB 9 — 9 9
ISO 9 — —
DRIVE 9 — —
ESP/n 9 — 9
IMAGE QUALITY 9 9 9
SILENT MODE 9 9 9
DIGITAL ZOOM 9 — 9
AF MODE 9 — —
R 9 — —
PANORAMA 9 — —
Monitor indication Possible cause Corrective action
d4314_15_e.book Page 60 Monday, June 26, 2006 7:13 PM