Olympus Stylus 740 - Manual (Page 34)

34
EN
Menu operations
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note that
pressing o will turn the camera on.
When [SNOOZE] is set to [OFF], the alarm stops automatically and the camera turns off after 1
minute of no operation.
• Checking the alarm settings:
While the camera is off, press  to display the set alarm time and the current time for 3
seconds.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV’s video signal type.
• TV video signal types by country/region Check the video signal type before connecting the camera to
the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
When no operation has been performed for approximately 10 seconds while in shooting mode, the
monitor automatically shuts off. Pressing the zoom button or other buttons restores the camera
from power save mode.
VIDEO OUT ................................................................................. Playing back pictures on a TV
NTSC / PAL
POWER SAVE ............................................................Setting the camera to power save mode
OFF / ON
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
AV cable (provided)
Multi-connector
Connector cover
Settings on the camera
Press o in playback mode to turn the
camera on.
• The last picture taken is displayed on the TV.
Use the arrow pad to select the picture you
want to display.
Settings on the TV
Turn the TV on, and set it to video input
mode.
• For details of switching to video input, refer to
your TV’s instruction manual.
d4314_15_e.book Page 34 Monday, June 26, 2006 7:13 PM