Olympus E-M10 - Manual (Page 48)

48 EN
Basic operations
5
Taking panoramas
If you have installed the supplied computer software, you can use it to join pictures together
to form a panorama.
g “Connecting the camera to a computer and a printer” (P. 111)
1 Rotate the mode dial to SCN.
2 Select [Panorama] and press Q.
3 Use FGHI to choose a pan direction.
4 Take a picture, using the guides to frame the shot.
• Focus, exposure, and other settings are fi xed at the
values for the fi rst shot.
250 250 F5.6 38 M
5 Take the remaining images, framing each shot so that the guides overlap with
the previous picture.
[ 2 ] 250 250 F5.6 38 M [ 3 ] Exit Exit
• A panorama may include up to 10 images. A warning indicator ( g) is displayed after
the tenth shot.
6 After taking the last shot, press Q to end the series.
# Cautions
• During panorama shooting, the image previously taken for position alignment will not be
displayed. With the frames or other markers for display in the images as a guide, set the
composition such that the edges of the overlapping images overlap within the frames.
$ Notes
• Pressing Q before shooting the fi rst frame returns to the scene mode selection menu.
Pressing Q in the midst of shooting ends the sequence of panorama shooting, and allows
you to continue with the next one.