Olympus E-M10 - Manual (Page 66)

66 EN
Using shooting options
6
• During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button halfway when using the self-
timer, the photograph may be out of focus.
Adding effects to a movie
You can create movies that take advantage of the effects available in still photography
mode. Set the dial to n to enable the settings.
1 Rotate the mode dial to n, press the Q button,
and use the rear dial to select a shooting mode
item.
P P
P P
WB
AUTO
WB WB WB
AUTO AUTO AUTO
n P P A A S S M M
P P
S-AF S-AF
j
M-IS ON M-IS ON
FullHD
F Program Auto
Shooting mode
2 Switch the shooting mode using the front dial and press the Q button.
P Optimal aperture is set automatically according to the brightness of the subject.
A
Depiction of background is changed by setting the aperture. Use the rear dial to
adjust the aperture.
S
Shutter speed affects how the subject appears. Use the rear dial to adjust the
shutter speed. Shutter speed can be set to values between 1/30 s and 1/4000 s.
M
You control both aperture and shutter speed. Use the front dial to choose the
aperture, the rear dial to select the shutter speed from values between 1/30 s and
1/4000 s. Sensitivity can be set manually to values between ISO 200 and 3200;
auto ISO sensitivity control is not available.
# Cautions
• When recording a movie, you cannot change the settings for exposure compensation,
aperture value, and shutter speed.
• If [Image Stabilizer] is activated while recording a movie, the recorded image is enlarged
slightly.
• Stabilization is not possible when the camera shake is excessive.
• When the inside of the camera becomes hot, shooting is automatically stopped to protect
the camera.
• With some art fi lters, [C-AF] operation is limited.
• Cards with an SD speed class of 6 or above are recommended for movie recording.