Olympus E-M10 - Manual (Page 60)

60 EN
Using shooting options
6
6
Using shooting options
Reducing camera shake (image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magnifi cation. The image stabilizer starts when you
press the shutter button halfway.
1 Press the Q button and select the image stabilizer.
250 250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:03 01:02:03
1023 1023
Image Stabilizer
When shooting using
the viewfi nder
When shooting using
live view
WB
AUTO
WB WB WB
AUTO AUTO AUTO
L N
4:3
j
WB
AUTO
WB WB WB
AUTO AUTO AUTO
mm mm
50 50 S-IS S-IS S-IS S-IS OFF OFF S-IS AUTO S-IS AUTO
S-IS AUTO S-IS AUTO
S-IS S-IS
FullHD
F
P
Focal Length
Auto I.S.
Image
stabilizer
2 Select an item using the front dial and press the Q button.
Still
picture
OFF Still-I.S. Off Image stabilizer is off.
S-IS1
All Direction
Shake I.S. Image stabilizer is on.
S-IS2
Vertical Shake
I.S. Image stabilization applies only to vertical
(
Y) camera shake.
S-IS3
Horizontal
Shake I.S.
Image stabilization applies only to horizontal
(
Z) camera shake. Use when panning the
camera horizontally with the camera held in
portrait orientation.
S-IS AUTO Auto I.S.
The camera detects the panning direction and
applies the appropriate image stabilization.
Movie
OFF Movie-I.S. Off Image stabilizer is off.
ON Movie-I.S. On
In addition to applying image stabilization in
all directions, the camera compensates for the
camera shake that occurs when you walk.
Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded)
Use focal length information to reduce camera shake when shooting with lenses that are not
Micro Four Thirds or Four Thirds system lenses.
• Select [Image Stabilizer], press the INFO button, use HI to select a focal length, and
press Q.
• Choose a focal length between 8 mm and 1000 mm.
• Choose the value that most closely matches to the one that is printed on the lens.