Olympus SP-565 UZ - Manual (Page 43)

43 EN
Making an overlay image with
fi reworks
([b MULTI FIREWORKS] mode)
1 Select [b MULTI FIREWORKS].
10 M 10 M
44
IN N ORM N ORM
2 Press the shutter button to take the fi rst
frame.
The exposure is locked at the fi rst frame. The
saved image is displayed as the background.
To retake the fi rst shot, press the o button,
and then press the shutter button again.
10 M 10 M
33
IN N ORM EXIT OK
3 Adjust the position of the fi reworks that
will be taken in the second frame over the
fi rst frame used as the background, and
then press the shutter button.
The overlay image is saved as a separate
image from the fi rst and second frames.
To retake the second shot, press the shutter
button again.
●
●
Saving only selected images
from sequentially shot images
([SHOOT & SELECT 1/2] mode)
1 Select [e SHOOT & SELECT 1] or
[f SHOOT & SELECT 2]. Hold down the
shutter button to take sequential shots.
OK MENU BACK GO
Thumbnails of
sequentially
shot images
Icon for selected
mode
Selected image
Select and erase screen
2 Use 9: to select the image to be
erased, and press the o button.
OK GO
R mark will be
attached to the image
to be deleted.
3 Repeat step 2 to select the images to be
erased, and then press the D button to
erase the selected images.
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
book_d4374_en.indb 43 book_d4374_en.indb 43 18/07/2008 13:39:20 18/07/2008 13:39:20