Olympus SP-565 UZ - Manual (Page 57)

57 EN 57
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Viewing the image immediately after shooting [REC VIEW]
x SETUP X REC VIEW
Submenu 2 Submenu 3 Application
OFF —
The image being recorded is not displayed. This allows the user to
prepare for the next shot while following the subject in the monitor or
viewfi nder after shooting.
ON
LCD ONLY The last image being recorded is always displayed on the monitor.
CURRENT
The last image being recorded is displayed on the currently selected
display device (monitor or viewfi nder). “Switching between the
monitor and viewfi nder” (p. 25)
Even when set to [ON], you can resume shooting while the image is being displayed.
Selecting where the top menu is displayed [MENU DISPLAY]
x SETUP X MENU DISPLAY
Submenu 2 Application
LCD ONLY The top menu is always displayed on the monitor.
CURRENT The top menu is displayed on the currently selected display device (monitor or viewfi nder).
The submenu chosen in [MENU DISPLAY] will be displayed on the screen when the following
operations are done.
Pressing the
m
button
Pressing the
D
button in playback mode
Pressing the
P
button in shooting mode
●
●
●
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
book_d4374_en.indb 57 book_d4374_en.indb 57 18/07/2008 13:39:23 18/07/2008 13:39:23