Olympus SP-565 UZ - Manual (Page 80)

80 EN
Using a microSD Attachment
Do not use the attachment with Olympus
digital cameras that do not support this
microSD Attachment, as well as with other
brands of digital cameras, computers,
printers and other devices that support
xD-Picture Card. Doing so not only may
damage the pictures taken, but may also
result in the malfunction of the device.
If the microSD card cannot be removed,
do not use force. Contact authorized
distributors/service centers.
Cards compatible with this camera
microSD card
microSDHC card
For a list of tested microSD cards, please
visit our website (http://www.olympus.com/).
Sending images
You can send images to a computer or
printer by using the USB cable provided with
the camera.
To send data to other devices, remove
the attachment from the camera and use
a commercially available microSD card
adapter.
Handling precautions
Do not touch the contact area of the
attachment or microSD card. Doing so
may cause failure in reading the images.
When fi ngerprints or stains are found on
the contact area, wipe the area with a soft
dry cloth.
Taking pictures with the
Olympus Wireless RC Flash
System
You can take pictures with a wireless fl ash
when using a fl ash compatible with the Olympus
Wireless RC Flash System. This enables
multi-fl ash photography using multiple fl ash
units compatible with this system. The camera’s
built-in fl ash is used for communication between
the camera and fl ash.
For details about operation of a wireless
fl ash, refer to the instruction manual for the
special external fl ash.
1 Set the wireless fl ash based on the
guidelines below.
Wireless fl ash setup range guidelines
The setup range varies depending on the
ambient environment.
5m
50°
50°
10m
30°
30°
50°
50°
30°
30°
Point the remote
sensor toward
the camera Flash direction
2 Turn on the wireless fl ash.
3 Use the MODE button on the
wireless fl ash to set to RC mode,
and make the channel and group
settings.
The group is set to A. (The B and C settings do
not work.)
4 Turn on the camera, and press the
# button to fl ip up the built-in fl ash.
5 Set [QFLASH] (p. 38) on the
camera to [ #RC], and set the
channel (CH1 to CH4) to the same
setting as the wireless fl ash.
●
book_d4374_en.indb 80 book_d4374_en.indb 80 18/07/2008 13:39:29 18/07/2008 13:39:29