Turning on the camera and checking the battery – Olympus D-300 User Manual
Page 20
)
TURNING ON THE CAMERA AND CHECKING THE BATTERY
To turn on the camera, slide open the lens cover as shown. Remaining battery power and remaining pictures are indicated on the
control panel.
➧
If you do not operate the camera for three minutes, the
power save function activates and the power turns off
automatically.
➧
To turn on again, close and open the lens cover or
depress the shutter release button halfway.
<Make sure>
When you turn on the power, battery status is indicated as
below.
Display
Meaning
lights and turns off
Batteries are OK.
automatically.
You can shoot.
blinks and other
Battery power is low and
indicators on the control
batteries should be replaced.
panel are displayed
normally.
blinks and other
Batteries are dead and
indicators on the control
should be replaced
panel go out.
immediately.
◆
Keep spare batteries on hand when going on a long
trip or to a wedding for example, or when using the
camera in cold weather.
Note: