Olympus D-300 - Manual (Page 39)

O
SLIDE-SHOW MODE MULTI-DISPLAY MODE
1 2
You can run through all the pictures
automatically.
2 3
6
9 8 7
4
1
5
5
Nine frames are shown on the LCD monitor
This function works when the lens cover is closed.
1 Display the picture.
2 Press the Slide-Show button to start running through the
frames automatically.
Ⅲ The frame number and protect mark are displayed
together with the frame on the LCD monitor.
3 Press the Slide-Show button again to stop at the currently
displayed frame.
Ⅲ The Slide-Show mode doesn’t stop until you cancel the
operation. Press the Slide-Show button to cancel this
mode.
Ⅲ The Slide-Show is also available in the Multi-Display
mode.
This function works when the lens cover is closed.
1 Display a picture.
2 Press the Multi-Display button. Nine frames are displayed
with the currently selected frame displayed in the center.
3
When you press the Previous (–) button, the selected
frame advances.
Ⅲ Press the Next (+) button to go backward.
4 After the frame in the upper-left corner of the display is
selected, the next six frames are displayed. (If you are
using the Next (+) button, the new frames are added when
the picture in the lower-right corner is selected.)
5 Press the Multi-Display button to cancel the Multi-Display
mode. The currently selected frame is displayed.