Olympus TG-2 iHS - Manual (Page 28)

28 EN
Aspect Sets the horizontal-to-vertical ratio of images.
u 4:3
Change the horizontal-to-vertical ratio when taking pictures.
v 16:9
w 3:2
x 1:1
● In certain shooting modes, some functions cannot be set. Refer to “List of settings available in each shooting
mode” (p. 73).
● Examples of image size when the aspect ratio is 4:3.
Registering one touch white balance Registering one touch white balance
Select [ One Touch 1] or [ One Touch 2], face the camera toward a piece of white paper or other white
object, and press the
 button.
● The camera releases the shutter and the white balance is registered. When the white balance was
previously registered, the registered data is updated.
● The registered white balance data will not be cleared by turning off the power.
● Perform this procedure under the light where the pictures will be actually taken.
● When the camera settings are changed, the white balance must be registered again.
● When the white balance cannot be registered, check that the white paper fi lls the screen, and then
perform the procedure again.