Olympus TG-2 iHS - Manual (Page 57)

57 EN
Installing the PC software and
registering user
Windows Windows
1
Insert the supplied CD in a CD-
ROM drive.
Windows XP
● A “Setup” dialog will be displayed.
Windows Vista/Windows 7/Windows 8
● An Autorun dialog will be displayed. Click
“OLYMPUS Setup” to display the “Setup” dialog.
● If the “Setup” dialog is not displayed, select “My
Computer” (Windows XP) or “Computer” (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
“OLYMPUS Setup” window and then double-click
“Launcher.exe”.
If a “User Account Control” dialog is displayed,
click “Yes” or “Continue”.
2
Register your Olympus product.
● Click the “Registration” button and follow the
on-screen instructions.
● To register the camera must be connected to
the computer. “Connecting the camera” (p. 56)
● If nothing is displayed on the camera screen
even after connecting the camera to the
computer, the battery may be exhausted.
Charge the battery and then connect the
camera again.
3
Install OLYMPUS Viewer 3.
● Check the system requirements before
beginning installation.
● Click the “OLYMPUS Viewer 3” button and
follow the on-screen instructions to install the
software.