Olympus TG-2 iHS - Manual (Page 67)

67 EN
Monitor Monitor
“Diffi cult to see”.
● Condensation may have occurred. Turn off
the power, and wait for the camera body
to become acclimated to the surrounding
temperature and dry out before taking pictures.
“The light is caught in the picture”.
● Shooting with fl ash in dark situations results in
an image with many fl ash refl ections on dust
in the air.
Date and time function Date and time function
“Date and time settings return to the default
setting”.
● If the batteries are removed and left out of the
camera for about 3 days *1 , the date and time
settings return to the default setting, and must
be reset.
*1 The time until the date and time settings
return to the default setting varies depending
on how long the batteries have been loaded.
“Turning on the camera and making the initial
settings” (p. 7)
Miscellaneous Miscellaneous
“The camera makes a noise when taking
pictures”.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to
shoot.
“The compass heading is not correct or the
compass needle fl ashes”.
● The compass does not function as expected
in the vicinity of strong electromagnetic
fi elds such as those produced by televisions,
microwaves, large electric motors, radio
transmitters, and high-voltage power lines.
Normal function can sometimes be restored by
moving the camera through a fi gure eight while
rotating your wrist.