Olympus XZ-10 - Manual (Page 15)

15 EN
Basic photography
2
Warning display
example (blinking)
Status Action
2000 2000 F1.8 F1.8 The subject is underexposed. Set the shutter speed slower.
125 125 F8 F8 The subject is overexposed.
• Set the shutter speed faster.
• If the warning display does not
disappear, the metered range
of the camera is exceeded.
Set [ND Filter Setting] to [On].
“Using live control” (P. 31)
Choosing aperture and shutter speed (M manual mode)
In mode M, you choose both the aperture and the shutter speed. Set the mode dial to M,
and set the shutter speed with the control ring, and the aperture value with the sub dial.
• The shutter speed can be set to 1/2000 – 30 sec.
• You can change the functions assigned to the control ring and the sub dial.
g [Dial
Function] (P. 51)
# Cautions
• Exposure compensation is not available in M mode.
Noise in images
While shooting at slow shutter speeds, noise may appear on-screen. These phenomena
are caused when current is generated in those sections of the image pickup device that
are not normally exposed to light, resulting in a rise in temperature in the image pickup
device or image pickup device drive circuit. This can also occur when shooting with a high
ISO setting in a high-temperature environment. To reduce this noise, the camera activates
the noise reduction function.
g [Noise Reduct.] (P. 52)