Olympus XZ-10 - Manual (Page 34)

34 EN
Frequently-used options
3
3
Select [Yes] and press Q.
• The new value is saved as a preset white balance option.
• The new value is stored until one-touch white balance is recorded again. Turning the
power off does not erase the data.
% Tips
• If the subject is too bright or too dark or visibly tinted, the message [WB NG Retry] will be
displayed and no value will be recorded. Correct the problem and repeat the process from
Step 1.
Setting the image aspect (Image Aspect)
You can change the aspect ratio (horizontal-to-vertical ratio) when taking pictures.
Depending on your preference, you can set the aspect ratio to [4:3] (standard), [16:9],
[3:2] or [1:1].
1
Display the live control and select the aspect ratio item using FG.
2
Use HI to select an aspect ratio and press Q.
# Cautions
• JPEG images are cropped to the selected aspect ratio; RAW images, however, are not
cropped but are instead saved with information on the selected aspect ratio.
• When RAW images are played back, the selected aspect ratio is shown by a frame.
Image quality (Record Mode)
Select an image quality for photographs and movies according their intended use, for
example retouching on a computer or display on the web.
1
Display the live control and use FG to choose
a record mode for photographs or movies.
2
Select an option using HI and press Q.
L F
4:3
P
WB
AUTO
WB WB WB
AUTO AUTO AUTO
IS OFF IS OFF
i
HD
RAW RAW L N M N S N L F
+RAW +RAW
L N
+RAW +RAW
3968x2976
Record mode
  Record modes (still images)
Choose from RAW and JPEG (YF, YN, XN, and WN) modes. Choose a RAW+JPEG option
to record both a RAW and a JPEG image with each shot. JPEG modes combine image
size (Y, X, and W) and compression ratio (SF, F, N, and B). The options available can be
selected using the [K Set] option in the custom menus.