Olympus E-420 - Manual (Page 109)

109
EN
12
Shooting tips and maintenance
Error codes
Viewfinder
indications
Monitor indication Possible cause Corrective action
Normal indication
NO CARD
The card is not
inserted, or it cannot
be recognized. Insert a card or insert
a different card.
CARD ERROR
There is a problem
with the card. Insert the card again.
If the problem persists,
format the card. If the
card cannot be
formatted, it cannot be
used.
WRITE PROTECT
Writing to the card is
prohibited. The card has been set
to read-only setting
with the computer.
Reset the card with
the computer.
No indication
CARD FULL
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can
be recorded. Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
There is no space in
the card and print
reservation or new
images cannot be
recorded. Replace the card or
erase unwanted
pictures.
Before erasing,
download important
images to a PC.
No indication
xD-Picture Cards
cannot be read or is
not formatted. • Select [xD CARD
CLEAN], press the
i button and turn
off the camera.
Remove the card
and wipe dry the
metallic surface with
a soft, dry cloth.
• Select [FORMAT]
[YES], and then
press the
i button
to format the card.
Formatting the card
erases all data on
the card.
No indication
NO PICTURE
There are no pictures
on the card. The card contains no
pictures.
Record pictures and
play back.
xD CARD CLEAN
FORMAT
Clean the terminal of the
xD card with the dry cloth.
CARD SETUP
SELECT GO
s0016_e_00_0_unified.book Page 109 Monday, February 18, 2008 2:43 PM