Olympus E-420 - Manual (Page 41)

41
EN
3
Using live view
You can check the effect of exposure compensation or white balance on a 4-split screen.
1
Press the INFO button repeatedly to display the
comparison screen.
g“Switching the information display” (P. 40)
• The exposure compensation comparison screen is
displayed. Press a to switch to the white balance
comparison screen. Press ac to switch the screen.
2
Use bd or the control dial to select the setting
value, then press the i button.
• You can take the picture using the set value.
x
Notes
• Exposure compensation is not available in M mode.
• This function cannot be used in
g mode.
It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
1
Press the INFO button repeatedly to display the enlarged display.
g“Switching the information display” (P. 40)
• The enlargement frame will be displayed.
2
Use p to move the frame and press the i button.
• The area inside the frame is enlarged and displayed.
• Press and hold the
i button to return the enlargement frame to the center after it was
moved.
3
Turn the control dial to change the magnification (7Ч/10Ч).
• Taking the picture or pressing the i button will cancel the enlarged display.
• During enlarged display, AF will not be activated even in the shutter button is pressed all the
way. You can take the picture after checking the focus in the enlarged display.
Taking a picture while comparing the effect
Enlarged display operation
GO WB/ F
+0.7 +0.7 +1.0 +1.0
0.0 0.0 +0.3 +0.3
250 250 F5.6 F5.6
38 38
i button
s0016_e_00_0_unified.book Page 41 Monday, February 18, 2008 2:43 PM