Olympus E-420 - Manual (Page 49)

49
EN
4
Exposure
The metered exposure value can be locked with the AEL/AFL button (AE lock). Use AE lock
when you want a different exposure setting from the one that would normally apply under the
current shooting conditions.
Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic
exposure), but you can lock the exposure alone by pressing the
AEL/AFL button.
Press the AEL/AFL button at the position where you wish
to lock the metering values and the exposure will be
locked. The exposure is locked while the
AEL/AFL button
is pressed. Now press the shutter button.
• Releasing the
AEL/AFL button cancels AE lock.
To lock the exposure:
j You can lock the metering result so that it is not canceled when
the AEL/AFL button is released. g“AEL/AFL MEMO” (P. 85)
To activate AE lock with a set metering mode:
j You can set the metering mode for locking the exposure with the
AE lock. g“AELMetering” (P. 87)
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit
subject or a scene at dusk), you can pick the picture you prefer from a selected number of
frames with a variety of different exposure settings. The pictures are taken in the following
order: Picture with optimum exposure, picture adjusted in – direction, and picture adjusted in
+ direction.
Compensation value: 0.3, 0.7 or 1.0
Number of frames: 3
AE lock
 TIPS
AE bracketing
AEL/AFL button
Viewfinder
AE lock
e.g.) When BKT is set to [3F 1.0EV]
-1.0EV +1.0EV ±0
s0016_e_00_0_unified.book Page 49 Monday, February 18, 2008 2:43 PM