Olympus STYLUS 1040 - Manual (Page 37)

37 EN
Printing
2
Turn on the printer, and then
connect the printer and camera.
3
Press the < button to start printing.
4
To print another image, use FD
to select an image, and press the <
button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
PRINT EXIT
Direct printing (PictBridge *1 )
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To fi nd out if your printer supports PictBridge,
refer to the printer’s instruction manual.
*1 PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer’s instruction
manual.
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.
Printing images at the
printer’s standard settings
[EASY PRINT]
1
Display the image to be printed on
the monitor.
“Viewing images” (p. 15)
Printing can also be started when the
camera is turned off. After performing Step
2, use
CE to select [EASY PRINT], and
press the x button. Use FD to select an
image, and proceed to Step 3.
OK PC / CUSTOM PRINT
EASY PRINT START
< button
Connector cover
Open the
connector cover
in the direction of
the arrow.
USB cable (supplied)
Multi-connector
d4377_e_oima_000_book_cs2e.indb 37 d4377_e_oima_000_book_cs2e.indb 37 7/1/2008 12:09:06 PM 7/1/2008 12:09:06 PM