45 en error message – Olympus STYLUS 1040 User Manual

Page 45

Advertising
background image

45

EN

Error message

When one of the messages below is

displayed on the monitor, check the
corrective action.

Error message

Corrective action

q

CARD ERROR

Card problem
Insert a new card.

q

WRITE

PROTECT

Card problem
Use a computer to cancel the
read-only setting.

>

MEMORY FULL

Internal memory problem

Insert a card.
Erase unwanted images.

*1


q

CARD FULL

Card problem

Replace the card.
Erase unwanted images.

*1


OK

SET

CARD SETUP

CLEAN CARD

FORMAT

Card problem

Use

CE

to select [CLEAN

CARD], and press the x
button. Take out the card, wipe
the contact area (p. 49) with a
soft, dry cloth, and then load
the card again.
Use

CE

to select [FORMAT],

and press the x button. Next,
use

CE

to select [YES], and

press the x button.

*2

IN

OK

SET

MEMORY SETUP

POWER OFF

MEMORY FORMAT

Internal memory problem
Use

CE

to select [MEMORY

FORMAT], and press the x
button. Next, use

CE

to select

[YES], and press the x button.

*2

L

NO PICTURE

Internal memory/Card problem
Take pictures before viewing
them.

r

PICTURE

ERROR

Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image fi le
is corrupted.

r

THE IMAGE

CANNOT

BE EDITED

Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.

CARD-COVER

OPEN

Operation problem
Close the battery/card
compartment cover.

THE LENS

BARRIER IS

CLOSED.

Operation problem
Slide the lens barrier down when
shooting.

g

BATTERY

EMPTY

Battery problem
Charge the battery.

NO

CONNECTION

Connection problem
Connect the camera and
computer or printer correctly.

NO PAPER

Printer problem
Load paper into the printer.

NO INK

Printer problem
Refi ll the ink in the printer.

JAMMED

Printer problem
Remove the jammed paper.

SETTINGS

CHANGED

*3

Printer problem
Return to the status where the
printer can be used.

PRINT ERROR

Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.

r

CANNOT PRINT

*4

Problem with selected image
Use a computer to print.

*1

Before erasing important images, download them to

a computer.

*2

All data will be erased.

*3

This is displayed, for instance, when the printer’s

paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.

*4

This camera may be unable to print images taken by

other cameras.

d4377_e_oima_000_book_cs2e.indb 45

d4377_e_oima_000_book_cs2e.indb 45

7/1/2008 12:09:09 PM

7/1/2008 12:09:09 PM

Advertising