Olympus SP-700 - Manual (Page 100)

100
6
Setti
ng
s
Changing the startup screen and shutdown
screen (PW ON SETUP/PW OFF SETUP)
You can select the picture displayed and the sound played when the
camera is turned on and turned off. You can also register your favorite
picture and display it on the screen.
g“Screen setup” (P. 101)
Top menu [MODE MENU] [SETUP] [PW ON SETUP]/
[PW OFF SETUP] g“Using the menus” (P. 19)
1
For [SCREEN], select [OFF], [1],
[2], or [3], and press Z.
OFF No picture is displayed.
1 A picture is displayed.
2 The picture registered with
[SCREEN SETUP] is displayed.
If there is no registered picture,
nothing is displayed.
3 The sample pictures in the
camera are displayed.
2
For [SOUND], select [OFF], [1], or
[2], and press Z.
OFF No sound.
1/2 Sound is omitted.
• The volume level is the same as that set
with [VOLUME].
g“Setting camera sounds (8/BEEP/
SHUTTER SOUND/VOLUME)” (P. 103)
3
Press Z.
Note
• You can only set [PW ON SETUP] for the [3] of the [SCREEN].
SELECT OK GO
PW ON SETUP
1
2
3
OFF
SOUND
SCREEN
OK
1
2
OFF
GO
PW ON SETUP
SOUND
SCREEN
SELECT