Olympus SH-50 iHS - Manual (Page 50)

50 EN
Saving battery power between Saving battery power between
shots
shots dd [Power Save] [Power Save]
Submenu 2 Application
Off Cancels [Power Save].
On
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
To resume standby mode To resume standby mode
Press any button.
Changing the display language Changing the display language
dd [ [l l]]
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
d Settings Menu 3
Setting the date and time Setting the date and time dd [ [ X X]]
1 Press FG of the arrow pad to select the year
for [Y].
2 Press I of the arrow pad to save the setting
for [Y].
3 As in Steps 1 and 2, press FGHI of the
arrow pad to set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order),
and then press the
A button.
● For precise time setting, press the A button as the
time signal strikes 00 seconds.
To check the date and time To check the date and time
Press and hold the INFO button while the camera is
turned off. The current time is displayed for approx.
3 seconds.
Choosing home and alternate time Choosing home and alternate time
zones
zones dd [World Time] [World Time]
● You will not be able to select a time zone using
[World Time] if the camera clock has not fi rst been
set using [
X].
Submenu 2 Submenu 3 Application
Home/
Alternate
x
The time in the home
time zone (the time
zone selected for x in
submenu 2).
z
The time in the travel
destination time zone
(the time zone selected
for
z in submenu 2).
x *1 —
Select the home time
zone (x).
z *1, 2 —
Select the travel
destination time zone
(
z).
*1 In areas where daylight saving time is in effect, use
FG to turn daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera
automatically calculates the time difference
between the selected zone and the home
time zone (x) to display the time in the travel
destination time zone (
z).