Olympus SH-50 iHS - Manual (Page 73)

73 EN
Using the card
Cards compatible with this camera Cards compatible with this camera
SD/SDHC/SDXC/Eye-Fi/FlashAir
(with Wireless LAN function)
card (commercially available)
(for compatibility card details, visit
the Olympus website.)
• This camera can be used without a card by storing
images in its internal memory.
FlashAir/Eye-Fi card
• “FlashAir” SD cards have built-in wireless LAN and
cannot be formatted. Use the software supplied
with the FlashAir card to format the card.
• Use the FlashAir or Eye-Fi card in compliance with
the laws and regulations of the country where the
camera is used. Remove the FlashAir or Eye-Fi
card from the camera or disable the card functions
in airplanes and other locations where use is
prohibited.
• The FlashAir/Eye-Fi card may become hot during
use.
• When using a FlashAir/Eye-Fi card, the battery
may run out faster.
• When using a FlashAir/Eye-Fi card, the camera
may function more slowly.
SD/SDHC/SDXC card write-protect switch SD/SDHC/SDXC card write-protect switch
The SD/SDHC/SDXC card body has a write-protect
switch.
If you set the switch to the “LOCK” side, you will not
be able to write to the card, delete data or format.
Return the switch to enable writing.
LOCK
Format Format
Cards must be formatted with this camera before
fi rst use or after being used with other cameras or
computers.
Checking the image saving location Checking the image saving location
The memory indicator shows whether the internal
memory or card is being used during shooting and
playback.
Current memory indicator
v: Internal memory is being used
w: Card is being used
Even if [Memory Format]/[Format], [Erase],
[Sel. Image], or [All Erase] is performed, the
data in the card is not completely erased. When
disposing of the card, damage the card to
prevent the disclosure of personal data.
Switching between a card and internal memory is
not available.
When using the internal memory, remove the
card fi rst.
Readout/recording process of the card Readout/recording process of the card
During shooting, the current memory indicator lights
up in red while the camera is writing data. Never
open the battery/card cover or unplug the USB cable.
This can not only damage the image data but also
render the internal memory or card unusable.