Olympus E-30 - Manual (Page 104)

104
EN
Cust
omizing your
c
amer
a
7
FILE NAME
When you take a picture, the camera assigns it a unique file name and saves it in a folder.
File names are assigned as shown in the illustration below.
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one
saved on the previous card, the new card’s file numbers start at the number following
the highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at
0001. If a card containing images is inserted, the file numbers start at the number
following the highest file number on the card.
PRIORITY SET
You can customize the initial position of the cursor ([YES] or [NO]) on the Erasing images or
Formatting the card screen.
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press d to display the setting screen.
Custom Menu 1 i K UTILITY
CLEANING MODE gP. 126
EXT. WB DETECT
You can disable the white balance sensor used to determine the light source during auto
white balance. This is useful when the light source near the sensor and the light source
illuminating the subject are different.
s0017_e_00_0_unified.book Page 104 Thursday, October 30, 2008 2:47 PM