Setting the one-touch white balance, Wb bracketing – Olympus E-30 User Manual

Page 69

Advertising
background image

69

EN

4

Rec

o

rd

mode,

whit

e ba

lanc

e, and pic

ture
mode

Checking the white balance you have adjusted:

j After setting the compensation value, point the camera at the subject to take test shots. When

the

AEL/AFL button is pressed, sample images that have been taken with the current WB

settings are displayed.

Adjusting all WB mode settings at once:

j See “ALL >” (gP. 101).

Setting the one-touch white balance

This function is useful when you need a more precise white balance than preset WB can
provide. Point the camera at a sheet of white paper under the light source you want to use to
determine the white balance. The optimum white balance for the current shooting conditions
can be saved in the camera. This is useful when shooting a subject under natural light, as
well as under various light sources with different color temperatures.
Set [

; FUNCTION] to [V] beforehand. (gP. 96)

1

Point the camera at a sheet of white paper.

• Position the paper so that it fills the viewfinder. Make sure there are no shadows.

2

While holding down the

< button, press the shutter

button.

• The one-touch white balance screen appears.

3

Select [YES] and press the

i button.

• The white balance is registered.
• The registered white balance will be stored in the camera as

a preset WB setting. Turning the power off does not erase
the data.

After pressing the shutter button, [WB NG RETRY] is displayed:

j When there is not enough white in the image, or when the image is too bright, too dark or the

colors look unnatural, you cannot register the white balance. Change the aperture and shutter
speed settings, then repeat the procedure from Step 1.

Three images with different white balances (adjusted in specified color directions) are
automatically created from one shot. One image has the specified white balance, while the
others are the same image adjusted in different color directions.

• Use the sub dial to set in the A-B direction or the main dial to set in the G-M direction.



TIPS



TIPS

WB bracketing

Direct button

WB + G k: EV step in A-B direction/
j

: EV step in G-M direction

Menu

MENU [X] [WB BKT]

< button

s0017_e_00_0_unified.book Page 69 Thursday, October 30, 2008 2:47 PM

Advertising