Olympus Stylus 800 Digital - Manual (Page 87)

Changing the startup screen and volume (PW ON SETUP)
87
6
Setti
ng
s
1
For [SCREEN], select [OFF], [1],
[2], or [3], and press Z.
OFF No picture is displayed.
1 / 2 A picture is displayed.
3 The picture registered with
[SCREEN SETUP] is
displayed. If there is no
registered picture, nothing is
displayed.
2
For [VOLUME], select [OFF],
[LOW], or [HIGH], and press Z.
OFF No sound.
LOW / HIGH Sound is output.
3
Press Z.
You can select the picture that is displayed when the power is turned on. Still pictures
in the internal memory or the card can be registered. Use [PW ON SETUP] to display
the screen you registered.
g“Changing the startup screen and volume (PW ON
SETUP)” (P. 86)
Top menu [MODE MENU] [SETUP] [SCREEN SETUP]
g“Using the menus” (P. 16)
• If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered picture
and register a new one. To register a new
picture, select [RESET], and press
Z. If you
select [KEEP], the screen returns to the menu.
Note
• If [SCREEN] is set to [OFF], [VOLUME] cannot be set.
Registering the startup screen (SCREEN SETUP)
OK GO
PW ON SETUP
VOLUME
SCREEN
SELECT
1
2
OFF
3
OK
LOW
HIGH
OFF
GO
PW ON SETUP
VOLUME
SCREEN
SELECT
RESET
KEEP
IMAGE EXISTING
SCREEN SETUP
SELECT CANCEL OK GO