Olympus µ-7000 - Manual (Page 27)

7 EN
Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions.
Shooting at higher magnifications than
optical zoom [DIGITAL ZOOM]
B CAMERA MENU  DIGITAL ZOOM
: K  I A
Submenu 2 Application
OFF
Only optical zoom is used to zoom in
for shooting.
ON
Optical zoom and digital zoom are
combined to zoom in for shooting
(Approx. 35× (max.)).
The setting is not available when [FINE ZOOM]
is set to [ON].
This function is not available when [% SUPER
MACRO] (p. 20) is selected.
Selecting the method for measuring the
brightness [ESP/n]
B CAMERA MENU  ESP/n
: K  A
Submenu 2 Application
ESP
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the center
and surrounding areas of the screen
separately).
5 (spot)
Shoots the subject at the center
during backlighting.
When set to [ESP], the center may appear dark
when shooting against strong backlighting.
Selecting the focusing area [AF MODE]
B CAMERA MENU  AF MODE
: K 
Submenu 2 Application
FACE DETECT *1
This is used for taking pictures of
people (The camera automatically
detects a face and a frame appears.
Press the shutter button halfway
down, and when the face is in focus,
the green AF target mark appears.
The orange target mark indicates
that the area other than the face is
in focus).
iESP
This enables you to compose the
shot without worrying about the
focusing position. The camera
finds the subject to focus on and
automatically adjusts the focus.
SPOT
The camera focuses on the subject
located within the AF target mark.
*1 For some subjects, the frame may not appear or may
take some time to appear.
Recording sound when shooting still
images [R]
B CAMERA MENU  R
: K 
Submenu 2 Application
OFF No sound is recorded.
ON
The camera automatically starts
recording for approx. 4 seconds after
taking the picture. This is useful for
recording notes or comments about
the picture.
When recording, aim the microphone (p. 6) at
the source of the sound you want to record.