Olympus µ-7000 - Manual (Page 37)

37 EN
Refer to “Using the Menu” (p. 3) when adjusting the settings of these functions.
Menus for Other Camera Settings
These settings can be made from the shooting mode top menu or playback mode top menu.
Erasing data completely
[MEMORY FORMAT]/[FORMAT]
E SETUP  MEMORY FORMAT/FORMAT
Before formatting, check that no important data
is left in the internal memory or card.
Non-Olympus cards and cards that have been
formatted by a computer must be formatted
with this camera before use.
Submenu 2 Application
YES
Completely erases the image data
in the internal memory *1 or card
(including protected images).
NO Cancels formatting.
*1 Be sure to remove the card before formatting the
internal memory.
Copying images from the internal
memory to the card [BACKUP]
E SETUP  BACKUP
Submenu 2 Application
YES
Backs up image data from the
internal memory to the card.
NO Cancels the backup.
It takes some time to back up data. Check that
the battery has sufficient power before starting
the backup, or use an AC adapter.
Changing the display language [W]
E SETUP  W
“Changing the display language” (p. 13)
Submenu 2 Application
Languages *1
The language for the menus and
error messages displayed on the
monitor is selected.
*1 The available languages vary depending on the country
and/or region where the camera was purchased.
Setting the startup display screen and
sound when the camera is turned on
[PW ON SETUP]
E SETUP  PW ON SETUP
Submenu 2 Submenu 3 Application
SCREEN
OFF No image is displayed.
1
A preset image *1 is
displayed.
2
A still image stored in the
internal memory or card is
registered for display. (This
option leads to the setup
screen.)
VOLUME
OFF (No
sound)/LOW/
HIGH
The volume of the startup
sound is selected.
*1 This image cannot be changed.
To register a startup image
1 Select [2] in submenu 3 for [SCREEN].
2 Use NO to select the image to be registered,
and press the E button.