Olympus E-520 - Manual (Page 49)

Exposur
e
4
49
EN
The camera automatically shoots a number of pictures at different exposure values for each
frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit subject
or a scene at dusk), you can pick the picture you prefer from a selected number of frames with
a variety of different exposure settings (exposure and compensation values). The pictures are
taken in the following order: Picture with optimum exposure, picture adjusted in – direction, and
picture adjusted in + direction.
Compensation value: 0.3, 0.7 or 1.0
• The compensation value will change if the EV step is changed.
g“EV STEP” (P. 92)
Number of frames: 3
Start shooting.
• In single-frame shooting, the exposure changes every
time the shutter button is pressed.
• In sequential shooting, hold down the shutter button until
the selected number of frames are taken.
• Releasing the shutter button stops auto bracketing
shooting. When it stops, 0 is displayed in green on
the super control panel.
How AE bracketing compensates exposure in each
shooting mode
Depending on the selected shooting mode, exposure is
compensated in the following way:
P mode : Aperture value and shutter speed
A mode : Shutter speed
S mode : Aperture value
M mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to the
exposure value you have compensated.
AE bracketing
Menu MENU[X][AE BKT]
 TIPS
e.g.) When BKT is set to [3 F 1.0 EV]
–1.0 EV +1.0 EV ±0
AE BKT
WB BKT
FL BKT
CANCEL SELECT GO
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
Viewfinder
The exposure value
for the next shot is
displayed during
shooting.