Olympus E-520 - Manual (Page 65)

R
ecor
d m
ode,
whi
te
balance
, and
picture m
ode
6
65
EN
Three images with different white balances (adjusted in specified color directions) are
automatically created from one shot. One image has the specified white balance, while the
others are the same image adjusted in different color directions.
• Use bd to select the color direction, and ac to set
the EV step.
• Select from [OFF], [3 F 2 STEP], [3 F 4 STEP], or [3 F
6 STEP] for the EV step for both the A-B (amber-blue)
direction and the G-M (green-magenta) direction.
• When the shutter button is pressed down all the way,
3 images adjusted in specified color directions are
automatically created.
To apply WB bracketing to the white balance you have adjusted:
j Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to the
white balance you have adjusted.
x
Notes
• During WB bracketing, the camera cannot shoot the pictures if there is not enough memory in the
camera and card for storing at least the selected number of frames.
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[ hVIVID] : Produces vivid colors.
[ iNATURAL] : Produces natural colors.
[ jMUTED] : Produces flat tones.
[ZPORTRAIT] : Produces beautiful skin tones.
[MONOTONE] : Produces black and white tone.
[CUSTOM]
: Select one picture mode, set the parameters, and register the setting. You
can also register the gradation to [CUSTOM]. This setting is set
separately from [GRADATION] in the menu.
g“Gradation” (P. 66)
WB bracketing
Menu MENU[X][WB BKT]
 TIPS
Picture mode
Super control panel i p: [PICTURE MODE]
Menu
MENU[W]
[PICTURE MODE]
A-B G-M
WB BKT
CANCEL SELECT GO
3F 4STEP 3F 4STEP
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT GO
PICTURE MODE
jMUTED
iNATURAL
ZPORTRAIT
MONOTONE
hVIVID